# Datapage in branch accessing wrong report definition

**URL:** <https://forums.pega.com/t/datapage-in-branch-accessing-wrong-report-definition/1804>\
**Category:** General\
**Tags:** communications-and-media, reporting, 8-1-5, system-cloud-ops-administrator\
**Created:** [October 13, 2021, 9:43am UTC](https://forums.pega.com/t/datapage-in-branch-accessing-wrong-report-definition/1804 "2021-10-13T09:43:48Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![CraigA52](https://avatars.discourse-cdn.com/v4/letter/c/c5a1d2/32.png) [@CraigA52](https://forums.pega.com/u/CraigA52)\
**Post date:** [October 13, 2021, 9:43am UTC](https://forums.pega.com/t/datapage-in-branch-accessing-wrong-report-definition/1804/1 "2021-10-13T09:43:48Z")

</div>

Hi All,

I’ve made a few changes to a datapage and the referenced report definition and both are in a branch. But when I run the datapage it’s not using the changed report definition that’s in the branch but continues to use the original one.

What gives? If I make the original one “not available” then the datapage doesn’t work.

Any ideas?

Thanks  
Craig

---

<div class="post-metadata">

**Author:** ![pavank](https://avatars.discourse-cdn.com/v4/letter/p/f0a364/32.png) [@pavank](https://forums.pega.com/u/pavank)\
**Post date:** [October 13, 2021, 10:02am UTC](https://forums.pega.com/t/datapage-in-branch-accessing-wrong-report-definition/1804/2 "2021-10-13T10:02:02Z")

</div>

@CraigA52Did you try check in and flushing of Data page and see if that it picking up correctly?

---

<div class="post-metadata">

**Author:** ![CraigA52](https://avatars.discourse-cdn.com/v4/letter/c/c5a1d2/32.png) [@CraigA52](https://forums.pega.com/u/CraigA52)\
**Post date:** [October 13, 2021, 10:09am UTC](https://forums.pega.com/t/datapage-in-branch-accessing-wrong-report-definition/1804/3 "2021-10-13T10:09:05Z")

</div>

Hi @pavan3753

Yes I flushed the datapage each and everytime I tried something different. No difference at all.

---

<div class="post-metadata">

**Author:** ![Avik\_Mitra](https://yyz2.discourse-cdn.com/pega/user_avatar/forums.pega.com/avik_mitra/32/12750_2.png) [@Avik\_Mitra](https://forums.pega.com/u/Avik_Mitra)\
**Post date:** [October 13, 2021, 11:18am UTC](https://forums.pega.com/t/datapage-in-branch-accessing-wrong-report-definition/1804/4 "2021-10-13T11:18:43Z")

</div>

@CraigA52

If it is a node level data page, ensure your D page access group has access to the branch.

---

<div class="post-metadata">

**Author:** ![CraigA52](https://avatars.discourse-cdn.com/v4/letter/c/c5a1d2/32.png) [@CraigA52](https://forums.pega.com/u/CraigA52)\
**Post date:** [October 13, 2021, 12:02pm UTC](https://forums.pega.com/t/datapage-in-branch-accessing-wrong-report-definition/1804/5 "2021-10-13T12:02:03Z")

</div>

@AvikMitra Well done that man, it was driving me nuts. Thanks for that.