# Configuration Manager App - Application Settings

**URL:** <https://forums.pega.com/t/configuration-manager-app-application-settings/8520>\
**Category:** General\
**Tags:** 24-1, healthcare-and-life-sciences, constellation, lead-system-architect\
**Created:** [October 25, 2024, 8:24pm UTC](https://forums.pega.com/t/configuration-manager-app-application-settings/8520 "2024-10-25T20:24:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![EDGARHDEZ](https://avatars.discourse-cdn.com/v4/letter/e/46a35a/32.png) [@EDGARHDEZ](https://forums.pega.com/u/EDGARHDEZ)\
**Post date:** [October 25, 2024, 8:24pm UTC](https://forums.pega.com/t/configuration-manager-app-application-settings/8520/1 "2024-10-25T20:24:22Z")

</div>

Hi, I’m implementing a Customer Service for Healthcare application. I have followed the documentation as per [Adding a Configuration manager application](https://docs.pega.com/bundle/customer-service/page/customer-service/constellation-implementation/case/config-mgr-app-setup.html) . I have an application stack as follows:

1. BaseCSHCDEV

2. BaseCSHC

3. CustomerService-HC-Constellation/PegaKM

I have created the documented data transform pattern in both Dev layer and Impl App

 ![Versions for GeneralSettings data transform.png](https://pega1.discourse-cdn.com/pega/original/2X/0/05d3b8819563400fb184978e2b259a0460ff9e90.png)

The only difference between the Dev layer and the Impl Layer rule is step 3 , as documentation states the name of the app is required to be set

 ![Data Transform Form.png](https://pega1.discourse-cdn.com/pega/original/2X/a/a9fe2ead153ecc6e37f7bdcede9ab9b5c2fe7f14.png)

When attempting to launch the configuration manager app from the Interaction portal, the URL stilll has the OOB URL

 ![Interaction Portal Launches OOB Configuration Manager App.png](https://pega1.discourse-cdn.com/pega/original/2X/d/d770cbaefd9766812fb4111cd7b209c39ca31061.png)

If I do a private edit of the OOB DT GeneralSettings\_CSHC and modify step 3 to the proper config manager app URL, the portal applies the correct URL, however since its a FINAL rule I cannot override in my layer. What is the suggested approach to properly launch my implementation configuration manager app?

---

<div class="post-metadata">

**Author:** ![barad](https://avatars.discourse-cdn.com/v4/letter/b/2acd7d/32.png) [@barad](https://forums.pega.com/u/barad)\
**Post date:** [October 28, 2024, 9:15am UTC](https://forums.pega.com/t/configuration-manager-app-application-settings/8520/2 "2024-10-28T09:15:02Z")

</div>

@EDGARHDEZ

Please run the data page D\_ApplicationSettings and check the value of the above properties being set in your GeneralSettings.. data transform. If it still reflects the value from GeneralSettings\_CSHC data transform, then please check if all the configurations in [Required setup to prepare the new implementation application](https://docs.pega.com/bundle/customer-service/page/customer-service/constellation-implementation/get-started/additional-setup.html) are taken care.

---

<div class="post-metadata">

**Author:** ![EDGARHDEZ](https://avatars.discourse-cdn.com/v4/letter/e/46a35a/32.png) [@EDGARHDEZ](https://forums.pega.com/u/EDGARHDEZ)\
**Post date:** [October 28, 2024, 2:07pm UTC](https://forums.pega.com/t/configuration-manager-app-application-settings/8520/3 "2024-10-28T14:07:11Z")

</div>

@barad Thank you for replying, sharing the name of the data page where the configuration is used, allowed me to troubleshoot an issue I had with the setup. The configuration is now launching the configured URL for the implementation as expected.-